Modular Off-site Manufacturing and pods

We all know that modularization of process modules, pipe racks, facility modules, cleanroom panels etc., increases predictability and reduces cost overruns. It also shortens the delivery time, leading to a faster return on investment.

There are several reasons for this. Manufacturing processes are evolving rapidly, with labour productivity increasing by more than 150% in the past 50 years. At the same time, conventional construction productivity has fallen by nearly 20%.

Modular manufacturing off-site allows more re-use of proven solutions and minimises the need to reinvent.
Efficient manufacturing workflows reduce time spent on preparation, getting materials, instructions and making up for errors etc. Indeed, 88% of a worker’s time is spent productively. Good teamwork, with no middleman involved in the modular manufacturing part of the project, only serves to help.
Construction industry productivity has dropped by 19% since 1964, but it has increased in tracked industries by 153%.

Modular Manufacturing:
Spend less, earn more 
With modular manufacturing, there’s little difference between the estimated costs at the concept design stage and the actual costs when production starts. This is one of the big advantages of modular manufacturing. It involves less risk. So, what are these risks? They include schedule risk, cost of capital risk, production risk and revenue risk. And risk costs money. Eliminating schedule risk, cost of capital risk and productivity risk can easily reduce the cost of a project by more than a third.

The bottom line? Modular manufacturing is the fastest way to increase revenues and profits.
 

In modular manufacturing,
There’s less to go wrong?
 

The vast majority of KeyPlants projects meet the planned budget and timelines, with no quality issues to be ironed out or unexpected costs. And when clients want to build a duplicate facility they do not have to start all over; much can be re-used.

Reducing the risk to revenue both from the shorter modular manufacturing timeline and from the lack of delays and quality issues significantly reduces costs compared to conventional construction. KeyPlants’ grid-based standard modular platform design and products let you take control and reduce the risk of the unexpected. Costs can be precisely calculated. Project timelines can be guaranteed. So can process quality. What you see on the drawing board is what you get on your site.

Higher quality and safety
Offsite fabrication in a factory makes the facility less dependent on labor quality, leading to higher productivity, better control of cost and schedule, higher predictability, and higher quality and safety, with substantial testing off-site.

Quality is consistent, because work is carried out by the same skilled workforce and tested in an ISO 9001-certified workshop. And if you decide you want another facility built in another part of the world, we can make a duplicate copy for you; the only variables are sight preparation and labor force building the external shell.

This predictability has bottom-line implications: Your facility will start producing your product on time and much faster than a conventional facility. And that means faster return on your investment.

Off-site manufacturing increases quality and safety.

With our quality management system, we have standard procedures and instructions in place, and these are used for all projects. The quality management system covers the complete project, from design, through procurement and manufacturing, to commissioning and qualification. Relevant, GMP-compliant documentation facilitates our clients’ validation, operations, and maintenance.

Modular manufacturing offsite obviously minimises such variables as differing materials, building codes, construction quality standards, and labour force quality. Fabrication in a factory also makes the facility less dependent on labour quality, leading to higher productivity and better control of costs and schedules.

Safety also improves because so much of the work is carried out in highly controlled factory conditions, instead of out in the field.

Replication and relocation
With offsite manufacturing, if you decide you want another facility built in another part of the world, we can make a duplicate copy for you. The only variables are site preparation and the labour force building the external shell. You also gain full flexibility in changing the location of a planned facility in response to an event.

For example, one client had planned to set up a facility in a Latin American country. But while the modules were being fabricated, political instability there caused concerns. So, the client decided to place the site in Southeast Asia instead.
 

Working on a building site is one of the world’s most hazardous occupations. This is why maintaining a safe and secure work environment is a key strategic area for us.

We are proud to have substantially reduced risks through effective, systematic work environment management. Our main priority is to ensure everyone returns home in full health at the end of the day, and we devote considerable resources to foster a culture of safety.

The aim is to maintain a workplace that is both progressive and physically, psychologically, and socially safe for every employee, so that the risks of occupational injury and work-related ill-health are prevented. For example, our factory-based employees always carry a safety line if they work high above the ground. We are also committed to maintaining a democratic workplace in which every employee is equal, whatever their role. This creates a safe and secure workplace for us, and a high-quality product for you.
 

Off-site manufacturing solves key technology transfer challenges.

Technology transfer is a key challenge whenever setting up new production, whether it’s scaling up from development for a commercial launch of a new product, increasing existing production by building a new facility, or establishing local production to launch an approved product on a new market. Distance, local building regulations, regulatory product approval, and cultural issues are among the hurdles.

Modular manufacturing off-site can be a fast, cost-effective, and low-risk solution for pharmaceutical companies looking to build identical production facilities across Europe, the U.S., and anywhere else in the world. Also, it's useful for companies looking to establish local production in developing countries with limited access to engineering and process expertise.

Streamlines regulatory approval and training

By ensuring identical manufacturing processes, the need for costly and time-delaying clinical studies is avoided, and the regulatory approval process can be streamlined. And with movable facilities, you can easily control the technology transfer process. For example, you can train operators in the location of the new facility, or somewhere close to current operations, or at KeyPlants’ workshop. That’s more effective than performing all tech transfer activities at some distant location.

KeyPlants also has the expertise to carry out off-site fabrication and pre-qualification efficiently, with minimum site disruption, through the rapid deployment of modular, movable facilities.

A compliant regulatory pathway
Limited differences between the existing and new facilities ensure smooth regulatory approval.

Movability
A complete manufacturing facility can be built in one location, further equipped, tested, and qualified in another location, and then moved again to a final site to begin production.

Off-site manufacturing
A complete building can be fabricated, with clean rooms, process equipment, and utilities.

All work is performed under workshop conditions according to agreed specifications.

By performing the tech transfer activities at the original manufacturing site, our clients can benefit from the full expertise and knowledge of their staff, and there’s no loss of information, knowledge, or experience.

With KeyPlants’ off-site modular approach, the facility design and manufacturing can also be conducted in parallel with search, permitting, and preparations at the final site. This further shortens the timeline.
 

We are constantly striving to improve the way we work to make it more environmentally friendly.

In our search for solutions that are gentler on the environment, we are always seeking ways to develop more sustainable processes and production methods. The challenges are many, but the environment is always on the agenda, helping us stay focused on the issue as we develop our company.

Every year, the quality of our environmental work must be reported and renewed, with new goals for continuous improvement and sustainable development. Below are some examples of the ways we are improving our work in the light of environmental concerns.

We have routines in place to optimise the usage of raw materials, such as steel, so we don’t use more than is necessary in our production process. When possible, we also try to use alternative products.

We constantly monitor and measure waste which arises in production. We sort waste that occurs during the production and renovation of modules, to minimise the waste that must go as landfill.

In the transportation of our modules to different sites, we strive to find ways to reduce emissions.

We also monitor and measure the energy consumption that keeps our business running, as well as being prepared for any emergency that could affect the environment in the event of an accident.